為了能夠確保丁基膠涂布機的正常運行，定期對設備進行常規的檢測是一個需要進行的工作。在檢測過程中可以及時的發現設備在技術，工作精度以及零部件運行時的隱患，對其進行針對性的修復措施，從而實現提升設備壽命和工作效率的效果。那么，在日常的設備檢測中，人們常用的方式有哪些呢？
In order to ensure the normal operation of butyl adhesive coater, it is necessary to carry out regular inspection on the equipment. In the detection process, the hidden dangers of equipment in technology, working accuracy and parts operation can be found in time, and targeted repair measures can be taken to improve the service life and work efficiency of the equipment. So, what are the commonly used methods in daily equipment testing?
丁基膠涂布機如何進行檢測
How to test butyl adhesive coater
一、初始露點以及紫外線照射
1、 Initial dew point and ultraviolet radiation
這是兩種為基礎的檢測方式，在檢測時需要專屬的設備對丁基膠涂布機內的空氣干燥性，影響視線的有機發揮物進行檢查與測定。當在規定的條件中，露點小于或等于-40度，玻璃內沒有霧狀，油狀或者其他污物時方為合格。
This is a two-way inspection method. During the inspection, special equipment is required to inspect and determine the air dryness in the butyl adhesive coater and the organic substances that affect the line of sight. It is qualified only when the dew point is less than or equal to -40 ℃ and there is no fog, oil or other dirt in the glass under the specified conditions.

二、密封檢驗
2、 Seal inspection
這種檢驗方式主要是應用在玻璃設備密封膠是否存在泄漏，且軟硬程度是否達標的情況。在進行密封檢查時，需要樣品在10±0.5KPA條件下保持2.5H厚度的增長偏差小于15%。當超過這個數值時則記為不合格。
This inspection method is mainly used to check whether the sealant of glass equipment has leakage and whether the hardness and softness meet the standard. During the sealing inspection, it is required to keep the increase deviation of 2.5h thickness of the sample under the condition of 10 ± 0.5kpa less than 15%. If it exceeds this value, it will be recorded as unqualified.
三、氣候循環的檢驗
3、 Verification of climatic cycle
在檢驗是需要丁基膠涂布機經歷一年四季的模擬氣候，期間需要加熱，自然冷卻以及強制制冷的操作，從而檢測玻璃在不同氣候下綜合性能。
During the inspection, the butyl adhesive coater needs to experience the simulated climate all year round, during which heating, natural cooling and forced cooling are required, so as to test the comprehensive performance of the glass in different climates.
四、高溫高濕實驗
4、 High temperature and humidity test
這種檢驗方式的檢驗是對密封膠的粘結力，水汽透過率以及分子篩的吸附能力的檢測，實驗時需要空氣濕度大于95%，溫度在25-55度之間，它通過循環實驗時中空玻璃內的氣體被壓縮和膨脹后的漏氣情況來判斷粘結力，水汽透過率是否達標。
The test of this test method is to test the adhesive force of sealant, water vapor transmission rate and the adsorption capacity of molecular sieve. During the test, the air humidity should be greater than 95% and the temperature should be between 25-55 degrees. It judges the adhesive force and whether the water vapor transmission rate meets the standard through the air leakage after the gas in the insulating glass is compressed and expanded during the cycle test.
丁基膠涂布機的檢測方式大概就如此了，在日常使用中也要做好相關的檢測工作，這樣才能更好的確保設備的使用。
This is probably the way the butyl adhesive coating machine is tested. It is also necessary to do a good job in the daily use, so as to better ensure the use of the equipment.
本文的精彩內容由臥式丁基膠涂布機提供知識提供，本網站還有很多的精彩內容，更多的內容您可以點擊進入：http://www.dgjiaxing.com.cn我們有專門的客服為您解答問題
The wonderful content of this article is provided by the knowledge of horizontal butyl adhesive coater. There are many wonderful content on this website. You can click to enter more content: http://www.dgjiaxing.com.cn We have special customer service to answer your questions